To Next Page

To Previous Page

Start Weight

SAMPLE ID: XXXX

CRUCIBLE WT: XXXX.X

Place syringe back onto

balance pan and press NEXT

Press BACK to Retare

Note: Press the BACK key to retare the balance.

47. Place the empty syringe back on the external balance pan.

48. Press the NEXT key.

READING BALANCE

49. Wait for the instrument to determine the weight of the empty syringe.

Start Weight

SAMPLE ID: XXXX

SAMPLE WT: XXX

Press NEXT key to weigh next

sample, or press SELECT for run screen

50. Press the SELECT key.

Quick Test

Current XX C XX:XX:XX

Program XXX C

Status: At Temp

WARNING

To prevent the possibility of serious burns, ensure that insulated

gloves and protective gear as outlined in the user’s safety program

are worn and metal tongs are used to insert and remove sample con-

tainers from the ashing furnace.

51. Open the instrument door. Remove the furnace door and place it in the furnace

door holder.

Questions and Answers:

Need help?

Do you have a question about the CEM Phoenix and is the answer not in the manual?

CEM Phoenix Specifications

General