1 Operational Manual
and the last class if for maintenance.
When the cipher is not exact, in the right of
“
AAAAAAAA
”
will show a sign
“ “
,
so you have to move cursor to
“
E
”
and enter the cipher class on 3, next move cursor
to
“
AAAAAAAA
”
and key in exact digits then will complete a correction. If you
want to exchange a new cipher, can move cursor to
“
BBBBBBBB
”
and key in desired
digits that will get a new cipher.
B) Data-Locking Function:
Move cursor to “CCCCCCCC” and enter cipher of class 0, so “
“ will appear on the right
of”CCCCCCCC“. Press
or or will have a flashing at the upper left
corner that means the cipher is inhibited to modify. If you want to solve the problem, move
cursor to “CCCCCCCC” and enter cipher of class 0, then “ “ on the right of “AAAAAAAA”
will disappear, that means exchanging cipher is available.
C). Reducing Speed for Maintenance:
Move cursor to
“
F
”
and press
or to select
“
open
”
, then the setting speed
will down to 50%. Actually, when you want to remove the function, can move cursor
to
“
F
”
and press
or to select
“
close
”
that will restore to the normal
operation.
D). Systematic Program Review:
“CDC [99/09/30] TAB [99/09/30] MOJ [99/09/30] FON [99/09/30]” shows the current
date of software finished by CDC-2000 controller.
。
04/08/13
155
To Next Page
Loading...
