Chromate 4300 - Page 86

82 ChroMate™ Operator’s Manual Doc. 4300 Rev. E
Steps Prompts/Screen Display
The Software
Settings window will
open:
Click on the
Communication Port
drop down menu,
and scroll up or
down to locate the
COM port setting
that matches the
COM port setting
from your PC (see
Section 6.2.1 PC
Communication
(COM) Port Setting).
Click to highlight the
setting and then
click on the OK
button to save the
setting.
NOTE: The COM
port setting will
remain at this
setting until it is
changed.