Chromate 4300 - Page 9

ChroMate™ ChroMate™ Operator’s Manual Doc. 4300 Rev. E 5
• Wear Protective Apparel Many diagnostic assays utilize materials that are
potential biohazards. Always wear protective apparel and eye protection while using
this instrument. Always operate this instrument with the aerosol shield lowered.
• Follow Operating Instructions Do not use this instrument in a manner not
specified by the manual, or the protection provided by the instrument may be
impaired.
• Use Proper Power Cord Use only the power cord specified for this product and
certified for the country of use.
• Ground the Product This product is grounded through the grounding conductor of
the power cord. To avoid electric shock, the grounding conductor must be
connected to earth ground. An optional method is to attach a ground strap from the
external grounding terminal on the rear panel of the instrument to a suitable ground
such as a grounded pipe or some metal surface to earth ground.
Warning!
Avertissement!
Warning! To avoid electric shock, the grounding conductor in
the supply cord must be connected to earth ground. An
optional method is to attach a ground strap from the external
grounding terminal on the rear panel of the instrument to a
suitable ground such as a grounded pipe or some metal
surface to earth ground.
Avertissement! Pour éviter la décharge électrique, vous devez
employer la corde de principal courant avec la terre électrique
(prise de terre). Vous pouvez attacher un bus de masse du
terminal a terre externe sur le panneau arrière de l’instrument
dans une pipe fondée des eaux.
• Observe All Terminal Ratings To avoid fire or shock hazard, observe all ratings
and markings on the instrument. Consult this manual for further ratings information
before making connections to the instrument.