5�2�2�1�- Event information�
The screen shown in Figure 188 displays all information about the selected transient.
Figure 188: Selected transient information screen�
The menu in the bottom area disappears after a few seconds. Click on the key to display
the lower area again.
>
>
>
<
<
<
varh
Q
Back
Main
menu
Event
Waveform
Figure 189:Transient information menu�
Use the and keys to select the different menus.
Click on the key to access the selected menu.
If no key is pressed for 5 minutes, the display screen changes automatically to the default
screen.
143
Instruction Manual
CVM-A1000 - CVM-A1500