5�1�1�1�3�1�2�- Analogue view�
The analogue display screen is shown in Figure 70.
Figure 70:Demand parameters, analogue view (display 1 parameter)�
>
>
<
<
varh
Back
Main
menu
Figure 71: Analogue view menu�
Use the keys and to browse the different options.
To access the option selected press the key .
The menu in the lower area disappears after 3 seconds. Press the key to display the lower
area again.
The second red coloured needle indicates the instantaneous value of the parameter being
displayed.
If there is an alarm associated with the variable being displayed, the following will be shown:
The module with which the alarm is associated.
The associated output in the module.
The alarm status: not activated, pre-alarm activated, alarm activated.
74
CVM-A1000 - CVM-A1500
Instruction Manual
To Next Page
Loading...
Need help?
General
