Circutor CVM-A1500 - Page 84

Table 22: Demand parameters that can be selected on the customisation screens�
Customisation screen
Icon Demand parameter
Current
Active power
Apparent power
To select a parameter, press the button to open the menu at the bottom for selecting the
phase:
Phase L1, Phase L2, Phase L3, Three-phase.
The tariff must be selected after selecting the phase:
Tariff 1, Tariff 2, Tariff 3.
Finally, the option appears for saving the selection.
5�1�1�2�1�1�4�- Select a quality parameter�
Figure 86 shows the screen for selecting a quality parameter.
Figure 86: Custom parameters screen (quality parameter)�
84
CVM-A1000 - CVM-A1500
Instruction Manual