Cisco 2950 - Catalyst Switch User Manual

4-4
Catalyst 2950 and Catalyst 2955 Switch Software Configuration Guide
78-11380-10
Chapter 4 Getting Started with CMS
Understanding CMS
Figure 4-2 Features Tab and Search Tab
Note Only features supported by the devices in your cluster are displayed in the feature bar.
You can search for features that are available for your cluster by clicking Search and entering a feature
name, as shown in Figure 4-2.
Access modes affect the availability of features from CMS. Some CMS features are not available in
read-only mode. For more information about how access modes affect CMS, see the “Privilege Levels”
section on page 4-7.
1 Features tab 2 Search tab

Cisco 2950 - Catalyst Switch Specifications

General

Forwarding Rate	6.6 Mpps
Jumbo Frame Support	No
Weight	8.8 lbs (4 kg)
RAM	16 MB
Flash Memory	8 MB
Manageable	Yes
Form Factor	Rack-mountable
Ports	24 Ethernet 10/100 ports
Uplink Ports	2 x 10/100/1000Base-T ports
VLANs	250
MAC Address Table Size	8000
Power Supply	100-240 VAC, 50-60 Hz
Dimensions	4.4 cm x 44.5 cm x 24.2 cm
Operating Temperature	0 to 40 °C (32 to 104 °F)
Storage Temperature	-25 to 70 °C (-13 to 158 °F)
Operating Humidity	10% to 85% (non-condensing)
Storage Humidity	5% to 95% (non-condensing)