Cisco 7960 - Replaying a Message; Saving a Message; Skipping to the Next Message; Deleting a Message

6-3
Cisco IP Phone Administration Guide for Cisco CallManager 3.2, Cisco IP Phones 7960/7940/7910
78-10453-04
Chapter 6 Configuring Cisco IP Phones, Users, and Features in Cisco CallManager
Configuring Cisco IP Phones in Cisco CallManager
Caller ID Displays number and name of caller From Cisco CallManager, choose:
Device > Phone to select outgoing
caller ID pattern and to select
whether to transmit or block caller ID
information.
Conference Initiates an ad hoc conference and then
conference in other participants one at a
time.
From Cisco CallManager, choose:
Service > Media Resource >
Conference Bridge to configure
device to support conferences.
Extension Mobility Enables users to sign into their
directory number from any Cisco IP
Phone
From Cisco CallManager, choose:
Device > Phone.
Forward Forwards all calls to the designated
directory number
From Cisco CallManager, choose:
Device > Phone and select the
directory number to configure. You
can configure Forward All, Forward
Busy, or Forward No Answer.
Users can also designate the forward
numbers in the Cisco IP Phone
Configuration windows.
Group call pickup Allows users to pick up incoming calls
within their own group or in other
groups
From Cisco CallManager, choose:
Feature > Call Pickup to configure.
From Cisco CallManager, choose:
Device > Phone and select the
directory number to assign a call
pickup group.
Hold Places an active call on hold This feature requires no
configuration to work, unless you
want to use music on hold.
Meet-Me conference Enables other callers to join in a
conference
From Cisco CallManager, choose:
Service > Conference Bridge to
configure Meet-Me parameters.
Table 6-1 Configuring Telephony Features Using Cisco CallManager (continued)
Feature Description Configuration Tips