Chapter 5 Configuring Network Settings on the Cisco IP Phone
Configuring VLAN Settings
5-20
Cisco IP Phone Administration Guide for Cisco CallManager 3.2, Cisco IP Phones 7960/7940/7910
78-10453-04
Cisco IP Phone 7910
Procedure
Step 1 Press settings.
Step 2 Press 6 (Network Configuration).
Step 3 Use the down volume key to select DNS server 1.
Step 4 Press * to edit.
Step 5 Use the buttons on the dial pad to enter the new DNS server address, using the
down arrow to back space and the * key on the dial pad to enter periods.
Step 6 Press # to save.
Configuring VLAN Settings
You can change the administrative VLAN used by the Cisco IP Phone. However,
if you have an auxiliary VLAN assigned on the Cisco Catalyst switch, that setting
overrides any changes made on the phone.
Cisco IP Phone 7960/7940
Procedure
Step 1 Press settings.
Step 2 Use Navigation button to select Network Configuration.
Step 3 Press the Select soft key.
Step 4 Scroll to Admin. VLAN Id.
Step 5 Press the Edit soft key.
Step 6 Use the buttons on the dial pad to enter the new Admin VLAN setting.
Step 7 Use the << soft key to correct any mistakes.
To Next Page
Loading...
