5-19
Cisco IP Phone Administration Guide for Cisco CallManager 3.2, Cisco IP Phones 7960/7940/7910
78-10453-04
Chapter 5 Configuring Network Settings on the Cisco IP Phone
Configuring IP Settings
Cisco IP Phone 7910
Changing the domain name on the Cisco IP Phone 7910 is not currently
supported.
Assigning DNS Servers
The DNS setting on the Cisco IP Phone allows users to specify remote computers
by host names, which are character strings with some mnemonic value, rather than
by using IP addresses, which are simply strings of numbers.
The phones use DNS to resolve the host name of TFTP servers,
Cisco CallManager systems, and web server host names when the system is
configured to use names rather than IP addresses.
Cisco IP Phone 7960/7940
Procedure
Step 1 Press settings.
Step 2 Use the Navigation button to select Network Configuration.
Step 3 Press the Select soft key.
Step 4 Scroll to DNS Server 1.
Step 5 Press the Edit soft key.
Step 6 Use the buttons on the dial pad to enter a new DNS server address, using the * key
on the dial pad or the . soft key to enter periods.
Step 7 Use the << soft key to correct any mistakes.
Step 8 Press the Validate soft key.
Step 9 Scroll to DNS Server 2-5 to add backup DNS server.
Step 10 Press Save.
To Next Page
Loading...
Need help?
General
