Cisco 7960 - Remote Phone

Chapter 5 Configuring Network Settings on the Cisco IP Phone
Modifying DHCP Settings
5-10
Cisco IP Phone Administration Guide for Cisco CallManager 3.2, Cisco IP Phones 7960/7940/7910
78-10453-04
Enabling DHCP
Cisco IP Phones enable DHCP by default, but you can reset the protocol if it
becomes disabled.
Cisco IP Phone 7960/7940
Procedure
Step 1 Press settings.
Step 2 Use the Navigation button to select Network Configuration.
Step 3 Press the Select soft key.
Step 4 Scroll to DHCP Enabled.
If DHCP is disabled, the option displays as
DHCP Enabled NO
Step 5 Press the Ye s soft key to enable DHCP.
Step 6 Press Save.
Cisco IP Phone 7910
Procedure
Step 1 Press settings.
Step 2 Press 3 (Network Configuration).
Step 3 Use the down volume key to select DHCP Enabled.
If DHCP is disabled, the option displays as
DHCP Enabled
NO
Step 4 Press * to edit.