Cisco 7960 Administration Guide

Chapter 5 Configuring Network Settings on the Cisco IP Phone
Modifying DHCP Settings
5-12
Cisco IP Phone Administration Guide for Cisco CallManager 3.2, Cisco IP Phones 7960/7940/7910
78-10453-04
Cisco IP Phone 7910
Procedure
Step 1 Press settings.
Step 2 Press 6 (Network Configuration).
Step 3 Use the down volume key to select DHCP Enabled.
If DHCP is enabled, the option displays as
DHCP Enabled
YES
Step 4 Press * to edit.
Step 5 Use the down volume key to select No.
Step 6 Press # to save.
Releasing a DHCP Address
When moving the phone to a new network segment, you should first release the
DHCP address.
Cisco IP Phone 7960/7940
Procedure
Step 1 Press settings.
Step 2 Use the Navigation button to select Network Configuration.
Step 3 Press the Select soft key.
Step 4 Scroll to DHCP Address Released.
If the DHCP address is currently assigned, the option displays as
DHCP Address Released No

Cisco 7960 Specifications

General

Codecs	G.711, G.729a
Protocol Support	SCCP, SIP
Ethernet Ports	2 x 10/100 Ethernet ports
Power Options	Power over Ethernet (PoE), AC adapter
Audio	Full-duplex speakerphone
Buttons	6 line buttons
Weight	3.5 pounds