Chapter 2 Preparing to Install the Cisco IP Phone on Your Network
Understanding Interactions with Other Cisco IP Telephony Products
2-2
Cisco IP Phone Administration Guide for Cisco CallManager 3.2, Cisco IP Phones 7960/7940/7910
78-10453-04
This section covers the following topics:
• Understanding How the Cisco IP Phone Interacts with Cisco CallManager,
page 2-2
• Understanding How the Cisco IP Phone Interacts with the Cisco Catalyst
Family of Switches, page 2-2
Understanding How the Cisco IP Phone Interacts with
Cisco CallManager
Cisco CallManager is an open and industry-standard call processing system.
Cisco CallManager software runs on a Windows 2000 server and sets up and tears
down calls between phones, integrating traditional PBX functionality with the
corporate IP network. Cisco CallManager manages the components of the IP
telephony system—the phones, access gateways, and the resources necessary for
such features as call conferencing and route planning.
For information about configuring Cisco CallManager to work with the IP
devices described in this chapter, refer to the Cisco CallManager Administration
Guide and the Cisco CallManager System Guide.
Understanding How the Cisco IP Phone Interacts with the
Cisco Catalyst Family of Switches
Cisco IP Phones have an internal Ethernet switch, enabling them to switch
incoming traffic to the phone, the access port, or to the network port (see the
“Connecting to the Network” section on page 2-6 for details).
If a computer is connected to the access port, data packets traveling to and from
the computer, and to and from the phone, share the same physical link to the
switch and the same port on the switch.
To Next Page
Loading...
Need help?
General
