Cisco 7960 - Managing the Access Code

Chapter 5 Configuring Network Settings on the Cisco IP Phone
Verifying Network Settings
5-6
Cisco IP Phone Administration Guide for Cisco CallManager 3.2, Cisco IP Phones 7960/7940/7910
78-10453-04
Information URL Specifies the location (UL) of the help
text for the information (?) button.
Available only on the
Cisco IP Phone 7960/7940.
Cannot configure locally. Use
Cisco CallManager to modify.
Directories URL Specifies the server from which the
phone obtains directory information.
Available only on the
Cisco IP Phone 7960/7940.
Cannot configure locally. Use
Cisco CallManager to modify.
Messages URL Specifies the message services URL. Available only on the
Cisco IP Phone 7960/7940.
Cannot configure locally. Use
Cisco CallManager to modify.
Services URL Specifies the location (URL) for
Cisco IP Phone Services.
Available only on the
Cisco IP Phone 7960/7940.
Cannot configure locally. Use
Cisco CallManager to modify.
DHCP Enabled Indicates whether DHCP is being used
by the phone.
See the “Modifying DHCP
Settings” section on page 5-9.
DHCP Address
Released
Allows the IP-address assigned by
DHCP to be released.
See the “Releasing a DHCP
Address” section on page 5-12.
Alternative TFTP Indicates whether the phone is using an
alternative TFTP server.
See the “Using an Alternate TFTP
Server” section on page 5-23.
Erase configuration Allows you to erase all locally-assigned
settings on the phone and reset values to
the default settings.
See the “Erasing Local
Configuration” section on
page 7-13.
Table 5-1 Network Settings (continued)
Network Setting Description Usage Notes