Chapter 5 Configuring Network Settings on the Cisco IP Phone
Configuring IP Settings
5-16
Cisco IP Phone Administration Guide for Cisco CallManager 3.2, Cisco IP Phones 7960/7940/7910
78-10453-04
Cisco IP Phone 7960/7940
Procedure
Step 1 Press settings.
Step 2 Use the Navigation button to select Network Configuration.
Step 3 Press the Select soft key.
Step 4 Scroll to Default Router 1.
Step 5 Press the Edit soft key.
Step 6 Use the buttons on the dial pad to enter the new router IP address, using the * key
on the dial pad or the . soft key to enter periods.
Step 7 Use the << soft key to correct any mistakes.
Step 8 Press the Validate soft key.
Step 9 Scroll to Default Router 2-5 to add backup gateways.
Step 10 Press Save.
Cisco IP Phone 7910
Procedure
Step 1 Press settings.
Step 2 Press 6 (Network Configuration).
Step 3 Use the down volume key to select Default Router 1.
Step 4 Press * to edit.
Step 5 Use the buttons on the dial pad to enter the new router IP address, using the down
arrow to backspace and the * key on the dial pad to enter periods.
Step 6 Scroll to Default Router 2-5 to add backup gateways.
Step 7 Press # to Save.
To Next Page
Loading...
Need help?
General
