Cisco 8961 - Page 262

DescriptionDHCPv6 State
Illegal IPv6 state and should not happenILLEGAL IPV6 STATE
Draft comment: ---------------End Chunk 8 (AG)-----------------------------
Display Wireless Statistics Screen
The Wireless Statistics screen displays statistics about the wireless Cisco Unified IP Phone 9971.
To display the Wireless Statistics screen, follow these steps:
Procedure
Step 1
Press Applications .
Step 2
Select Administrator Settings.
Step 3
Select Status.
Step 4
Select Wireless Statistics. See Wireless Statistics, on page 238 for a description of the Wireless statistics.
Step 5
To reset the Wireless statistics to 0, press Clear List.
Step 6
To exit the Wireless Statistics screen, press Exit.
Wireless Statistics
The following table describes the Wireless statistics on the phone.
Table 47: Wireless Statistics on the Cisco Unified IP Phone
DescriptionItem
Number of packets that the phone transmitted.Transmit Frames
Number of directed packets that the phone received.Directed Frames Received
Number of multicast packets that the phone received.Multicast Frames Received
Number of broadcast packets that the phone received.Broadcast Frames Received
Number of packets with errors that the phone received.Receive Errors
The phone has no buffers available to receive the packet.Receive No Buffers
Increments when an FCS error is detected in a received MPDU.Frame Checksum (FCS) Errors
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager
10.0 (SIP)
238
Model information, status, and statistics
Display Wireless Statistics Screen
REVIEW DRAFT - CISCO CONFIDENTIAL