9-11
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation Guide
OL-13208-11
Chapter 9 Cisco ASR 1002-F Router Overview and Installation
Installation Methods
Table 9-4 shows the DC power supply output voltage alarm range.
Power Cords Supported by the Cisco ASR 1002-F Router
Table 9-5 lists the power cords that are supported by the Cisco ASR 1002-F Router.
Installation Methods
The Cisco ASR 1002-F Router is designed for a standalone, two-rail 19-inch rack-mount (front rail
only), or four-rail 19-inch rack-mount (front and rear rail).
Although rack-mounting is the preferred method of installation for the Cisco ASR 1002-F Router, you
can mount the chassis on an equipment shelf or tabletop.
Note The Cisco ASR 1002-F Router usually ships fully loaded. However, you can remove components, such
as the power supplies, from the chassis to make the chassis lighter for your rack installation.
Table 9-4 DC Power Supply Output Voltage Alarm Threshold Ranges
Output Minimum Maximum
12V 10.0–11.2V 12.8–13.8V
3.3V 2.6–3.0 V None
Table 9-5 Power Cords Supported by the Cisco ASR 1002-F Router
Power Cord Item Number Description
CAB-AC-RA Power Cord, 110 V, Right Angle
CAB-ACA-RA Plug, Power Cord, Australian, 10 A, Right Angle
CAB-ACB10A-RA Power Cord, Brazil, Right Angle, 10 A
CAB-ACB16A-RA Power Cord, Brazil, Right Angle, 16 A
CAB-ACC-RA Power Cord China, Right Angle
CAB-ACE-RA Power Cord Europe, Right Angle
CAB-ACI-RA Power Cord, Italian, Right Angle
CAB-ACR-RA Power Cord Argentina, Right Angle
CAB-ACS-RA Power Cord, Switzerland, Right Angle
CAB-ACU-RA Power Cord UK, Right Angle
CAB-IND-RA Power Cord India, Right Angle
CAB-JPN-RA Power Cord-Japan, Right Angle
To Next Page
Loading...
