Cisco ASR 1000 Series - Page 358

11-22
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation Guide
OL-13208-11
Chapter 11 Cisco ASR 1013 Router Overview and Installation
Attaching the Cable-Management Bracket
Step 2 Using a Phillips screwdriver, insert the screw through cable-management bracket and into the chassis
rack-mount and tighten the screw.
Note Use the package of screws that came with your chassis containing eight screws.
Step 3 Using the bottom rack-mount ear hole on each side of the chassis, insert the screw through
cable-management bracket and into the chassis rack-mount)