Cisco ASR 1000 Series - Page 377

12-3
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation Guide
OL-13208-11
Chapter 12 Cisco ASR 1001 Router Overview and Installation
Cisco ASR 1001 Router Description
IDC-HD80G can support a single 2.5-inch SATA HDD/SSD (see Figure 12-1).
Figure 12-1 Cisco ASR 1001 Router with IDC-HD80G
1 HDD Online—LED indicates that the disk is
ready and can be accessed
7 LINK LED—Indicates MGMT Ethernet port
activity
2 HDD Activity—LED indicates that the disk is
currently being accessed
8 BF—Internal bootflash LED that indicates
activity of the EUSB device
3 HDD Slot—Slot into which the HDD is
inserted (the figure shows an HDD inserted
into the slot)
9 USB LED
4 AUX—RS-232 auxiliary port 10 USB port—USB high-speed (480 Mbps) port
used for secure key storage, VPN credentials
storage, or bulk flash storage of image and
configuration backup
This USB port is an A port.
5 CON—RS-232 console port 11 STAT—Status LED
6 MGMT—RJ-45 10/100/1000 management
Ethernet port
12 PWR—Power LED
279784
ASR 1001
LINK
IDC-HD80G
PWR
STAT
CRIT
MAJ
MIN
USB
BF
MGMT CON AUX
HDD ONLINE
ACTIVITY
3
1 2
6
7
9
8
10
4
5
11
12