Cisco ASR 1000 Series - Page 378

12-4
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation Guide
OL-13208-11
Chapter 12 Cisco ASR 1001 Router Overview and Installation
Cisco ASR 1001 Router Description
• IDC-OC3POS
IDC-OC3POS can support two channels of OC3 (see Figure 12-2).
Figure 12-2 Cisco ASR 1001 Router with IDC-OC3POS
1 C/A—Carrier/Alarm LED 8 LINK LED—Indicates MGMT Ethernet port
activity
2 A/L—Active/Loopback LED 9 BF—Internal bootflash LED that indicates
activity of the EUSB device
3 POS OC3—Port 0
This POS port is a small form-factor
pluggable (SFP) port.
10 USB LED
4 POS OC3—Port 1
This POS port is an SFP port.
11 USB port—USB high-speed (480 Mbps) port
used for secure key storage, VPN credentials
storage, or bulk flash storage of image and
configuration backup
This USB port is an A port.
5 AUX—RS-232 auxiliary port 12 STAT—Status LED
6 CON—RS-232 console port 13 PWR—Power LED
7 MGMT—RJ-45 10/100/1000 management
Ethernet port
— —
279783
ASR 1001
LINK
IDC-OC3POS
PWR
STAT
CRIT
MAJ
MIN
USB
BF
MGMT CON AUX
0
1
C/A 0 A/L C/A 1 A/L
3
1 2 4
7
8
10
9
11
5
6
12
13