Cisco ASR 1000 Series - Page 380

12-6
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation Guide
OL-13208-11
Chapter 12 Cisco ASR 1001 Router Overview and Installation
Cisco ASR 1001 Router Description
• IDC-CHT1/E1
IDC-CHT1/E1 can support eight ports of fully channelized T1 or E1 interfaces (see Figure 12-4).
Figure 12-4 Cisco ASR 1001 Router with IDC-CHT1/E1
1 T1/E1 Ports—Ports 0 through 3
These T1/E1 ports are RJ-45 ports.
7 BF—Internal bootflash LED that indicates
activity of the EUSB device
2 T1/E1 Ports—Ports 4 through 7
These T1/E1 ports are RJ-45 ports.
8 USB LED
3 AUX—RS-232 auxiliary port 9 USB port—USB high-speed (480 Mbps) port
used for secure key storage, VPN credentials
storage, or bulk flash storage of image and
configuration backup
This USB port is an A port.
4 CON—RS-232 console port 10 STAT—Status LED
5 MGMT—RJ-45 10/100/1000 management
Ethernet port
11 PWR—Power LED
6 LINK LED—Indicates MGMT Ethernet port
activity
— —
279786
IDC-CHT1/E1
ASR 1001
LINK
PWR
STAT
CRIT
MAJ
MIN
USB
BF
MGMT CON AUX
C/A 0 A/L C/A 1 A/L C/A 2 A/L C/A 3 A/L
0
1
2
3
C/A 4 A/L C/A 5 A/L C/A 6 A/L C/A 7 A/L
4
5
6
7
1 2
5
6
8
7
9
3
4
10
11