14-63
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation Guide
OL-13208-11
Chapter 14 Removing and Replacing FRUs from the Cisco ASR 1000 Series Routers
Removing and Replacing the Cisco ASR 1006 Router Power Supplies
Figure 14-44 shows the DC power supply terminal block with cables connected for the
ASR1006-PWR-DC power supply of the Cisco ASR 1006 Router.
Figure 14-44 Cisco ASR 1006 Router DC Power Supply Terminal Block Cable Connections
1 Negative lead 3 Protective sleeving around the stud and cable
2 Positive lead 4 Ground stud and cable
This unit might have more than one power supply connection. All connections must be removed to de-energ
OFF
-48/-60V 40A
280024
1 2
4
3
To Next Page
Loading...
