Cisco ASR 1000 Series - Page 54

2-14
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation Guide
OL-13208-11
Chapter 2 Cisco ASR 1000 Series Routers Component Overview
Cisco ASR 1000 Series Route Processor
Figure 2-2 shows the Cisco route processor with faceplate connectors.
Figure 2-2 Cisco ASR1000-RP Route Processor Connectors
Table 2-6 lists the Cisco ASR 1000 Series Route Processor LEDs and behavior.
1 CARRIER LED 4 MGMT Ethernet connector
2 BITS connector 5 CON connector
3 LINK LED 6 AUX connector
CARRIER
LINK
MGMT ETHERNET BITS CON AUX
280079
1 2 3 4 5 6
Table 2-6 Cisco ASR 1000 Series Route Processor LEDs
LED Label LED Color —State Behavior Description
PWR Power Solid green All power requirements are within
specification
— Off Off, the router is in standby mode.
STAT System status Solid green Cisco IOS software has booted.
— Yellow ROMMON has successfully loaded.
— Red System failure or during boot process.
ACTV Active Green Lit when the Cisco ASR 1000 Series RP is
active.
STBY Standby Yellow Lit when the Cisco ASR 1000 Series RP is
the standby processor.
CRIT Critical Solid Red Critical alarm indicator or during boot
process. An example: the ambient air
temperature is above 60ºC and will begin
shutdown in 5 minutes.
MAJ Major Solid Red Major alarm indicator. For example:
Ambient air temperature is beyond short
term operating range of 55ºC. System will
shut down above 60ºC.