14-112
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation Guide
OL-13208-11
Chapter 14 Removing and Replacing FRUs from the Cisco ASR 1000 Series Routers
Removing and Replacing the Cisco ASR 1001 Router Power Supplies
Step 9 Repeat Step 6 through Step 8 for the remaining two DC input power source wires, the positive lead wire
and the negative lead wire (see Figure 14-86).
Figure 14-86 Inserting the DC Power Supply Terminal Block Plug in the Block Header
Caution Secure the wires coming in from the terminal block plug so that they cannot be disturbed by casual
contact.
1 DC power supply negative (-) lead wire 3 DC power supply ground lead wire
2 DC power supply positive (+) lead wire — —
207696
To Next Page
Loading...
