Cisco ASR 1013 Hardware Installation Guide

•
Do not perform any action that creates a potential hazard to people or makes the equipment unsafe.
Never install equipment that appears damaged.
•
Carefully examine your work area for possible hazards such as moist floors, ungrounded power extension
cables, and missing safety grounds.
In addition, use the guidelines that follow when working with any equipment that is disconnected from a
power source but is still connected to telephone wiring or other network cabling.
•
Never install telephone wiring during a lightning storm.
•
Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations.
•
Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected
at the network interface.
•
Use caution when installing or modifying telephone lines.
Do not work on the system or connect or disconnect cables during periods of lightning activity. Statement
1006
Warning
Receiving the Cisco ASR 1000 Series Router
Each Cisco ASR 1000 Series chassis is shipped in a container that is strapped to a pallet as illustrated in the
following figure.
Figure 33: Cisco ASR 1000 Series Router Packaged for Shipping
Cisco ASR 1000 Series Router Hardware Installation Guide
132
Preparing Your Site for Installation
Receiving the Cisco ASR 1000 Series Router

Cisco ASR 1013 Specifications

General

Brand	Cisco
Model	ASR 1013
Category	Network Router
Language	English