Cisco ASR 1013 Hardware Installation Guide

DescriptionPower Cord Item Number
10 A AC Power Cord, Left Angle (United Kingdom)
(bundle option)
CAB-AC10A-90L-UK
15 A AC Power Cord, Left Angle (United States)
(bundle option)
CAB-AC15A-90L-US
Plug, Power Cord, Australian, 10 A, Right AngleCAB-ACA-RA
Power Cord, Brazil, Right Angle, 10 ACAB-ACB10A-RA
Power Cord, Brazil, Right Angle, 16 ACAB-ACB16A-RA
Power Cord China, Right AngleCAB-ACC-RA
Power Cord Europe, Right AngleCAB-ACE-RA
Power Cord, Italian, Right AngleCAB-ACI-RA
Power Cord Argentina, Right AngleCAB-ACR-RA
Power Cord, Switzerland, Right AngleCAB-ACS-RA
Power Cord UK, Right AngleCAB-ACU-RA
Power Cord-Japan, Right AngleCAB-JPN-RA
Connecting AC Input Power to Cisco ASR 1004 Router
Follow these steps to connect an AC input power supply to the Cisco 1004 chassis:
SUMMARY STEPS
1.
Insert an AC power supply in power supply slot 0 or power supply slot 1 until it is fully seated.
2.
Tighten the captive screws.
3.
Insert the AC power cable into the power inlet.
4.
Plug the power supply cable into the power source.
5.
Turn the power supply switch to the On position.
Cisco ASR 1000 Series Router Hardware Installation Guide
210
Cisco ASR 1004 Router Overview and Installation
Connecting AC Input Power to Cisco ASR 1004 Router

Cisco ASR 1013 Specifications

General

Brand	Cisco
Model	ASR 1013
Category	Network Router
Language	English