Cisco ASR 1013 Hardware Installation Guide

Four-Post Rack Installation
The Cisco ASR 1013 Router can be flush-mounted in a 19-inch equipment rack using the rack-mounting kit
provided with your system. The Cisco ASR 1013 Router can be mounted into the rack using two recommended
methods:
•
Installing the chassis in an existing rack with equipment.
•
Installing an empty chassis in a rack with no equipment installed.
Because the Cisco ASR 1013 chassis is very heavy, it is recommended that the chassis be installed at the
bottom of the rack if you are planning to install more than one Cisco ASR 1013 chassis in the same rack.
Note
Cisco ASR 1000 Series Router Hardware Installation Guide
383
Cisco ASR 1013 Router Overview and Installation
Four-Post Rack Installation

Cisco ASR 1013 Specifications

General

Brand	Cisco
Model	ASR 1013
Category	Network Router
Language	English