Cisco ASR 1013 Hardware Installation Guide

Behavior Description
Color —State
LEDLED Label
Minor alarm indicator.
Ambient air temperature
is beyond normal
operating range of 40ºC.
For example: if the RP
software determines that
an unknown card has
been installed or if the
card has failed, the card
can power it off or set a
minor alarm.
AmberMinorMIN
Activity indicator.Flashing GreenInternal hard drive LEDDISK HD
No activity.Off
Activity indicator.Flashing GreenExternal USB Flash
LED
DISK USB
No activity.Off
Activity indicator.Flashing GreenInternal USB bootflash
LED
DISK BF
No activity.Off
Out of service or not
configured.
OffLEDBITS I/F Mode
CARRIER
In frame and working
properly.
Solid Green
Fault or loop condition
exists.
Amber
Warmup, Free-run, or
Holdover.
OffLEDDTI ModeCARRIER
for Cisco ASR1000-RP2
Normal or bridging.Solid Green
Fast.Amber
Link with no activity.Solid Green10/100/1000 RJ-45
Interface LED
LINK
Link with Activity.Flashing Green
No link.Off
The following table lists the Cisco ASR 1000 Series Route Processors connectors and description.
Cisco ASR 1000 Series Router Hardware Installation Guide
41
Cisco ASR 1000 Series Routers Component Overview
Cisco ASR 1000 Series Route Processor Differences

Cisco ASR 1013 Specifications

General

Brand	Cisco
Model	ASR 1013
Category	Network Router
Language	English