Cisco Catalyst 3750 Hardware Installation Guide

Contents
x
Catalyst 3750 Switch Hardware Installation Guide
78-15136-03
APPENDIX D Translated Safety Warnings D-1
Attaching the Cisco RPS (model PWR300-AC-RPS-N1) D-1
Attaching the Cisco RPS (model PWR675-AC-RPS-N1) D-3
Shock Hazard From Interconnections D-4
Installation Warning D-8
Installation Instructions D-9
Jewelry Removal Warning D-10
Stacking the Chassis Warning D-12
Main Disconnecting Device D-14
Grounded Equipment Warning D-15
Installing or Replacing the Unit D-16
Overtemperature Warning D-18
Working During Lightning Activity D-20
Product Disposal Warning D-21
Chassis Warning for Rack-Mounting and Servicing D-23
Redundant Power Supply Connection Warning D-27
Switch Installation Warning D-29
Restricted Area D-30
Ethernet Cable Shielding in Offices D-32
Class 1 Laser Product D-33
Laser Beam Exposure D-35
Laser Radiation D-36
I NDEX

Cisco Catalyst 3750 Specifications

General

Device Type	Switch
Switching Capacity	32 Gbps
Forwarding Rate	38.7 Mpps
Stacking Bandwidth	32 Gbps
RAM	128 MB
Jumbo Frame Support	Yes
Switch Type	Managed
Model	Catalyst 3750 Series
Uplink Interfaces	SFP
Form Factor	Rack-mountable
MAC Address Table Size	12, 000 entries
Routing Protocol	RIP, OSPF, EIGRP
Remote Management Protocol	SNMP, Telnet, HTTP
Features	Layer 3 switching, Layer 2 switching, auto-negotiation, BOOTP support, ARP support, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, traffic shaping, MAC address filtering, Quality of Service (QoS), Jumbo Frames support, MLD snooping, Dynamic ARP Inspection (DAI), Cisco EnergyWise technology
Power over Ethernet (PoE)	PoE
Operating Temperature	-5 - 45 °C
Operating Humidity	10% to 85% non-condensing