Cisco IE 3000 User Manual

Contents
xxi
Cisco IE 3000 Switch Software Configuration Guide
OL-13018-01
Displaying SPAN and RSPAN Status 26-22
CHAPTER 27 Configuring RMON 27-1
Understanding RMON 27-1
Configuring RMON 27-2
Default RMON Configuration 27-3
Configuring RMON Alarms and Events 27-3
Collecting Group History Statistics on an Interface 27-5
Collecting Group Ethernet Statistics on an Interface 27-5
Displaying RMON Status 27-6
CHAPTER 28 Configuring System Message Logging 28-1
Understanding System Message Logging 28-1
Configuring System Message Logging 28-2
System Log Message Format 28-2
Default System Message Logging Configuration 28-3
Disabling Message Logging 28-4
Setting the Message Display Destination Device 28-5
Synchronizing Log Messages 28-6
Enabling and Disabling Time Stamps on Log Messages 28-7
Enabling and Disabling Sequence Numbers in Log Messages 28-8
Defining the Message Severity Level 28-8
Limiting Syslog Messages Sent to the History Table and to SNMP 28-10
Enabling the Configuration-Change Logger 28-10
Configuring UNIX Syslog Servers 28-12
Logging Messages to a UNIX Syslog Daemon 28-12
Configuring the UNIX System Logging Facility 28-12
Displaying the Logging Configuration 28-13
CHAPTER 29 Configuring SNMP 29-1
Understanding SNMP 29-1
SNMP Versions 29-2
SNMP Manager Functions 29-3
SNMP Agent Functions 29-3
SNMP Community Strings 29-4
Using SNMP to Access MIB Variables 29-4
SNMP Notifications 29-5
SNMP ifIndex MIB Object Values 29-5

Cisco IE 3000 Specifications

General

Operating Temperature	-40 to 75°C (-40 to 167°F)
DRAM	128 MB
Flash Memory	32 MB
Uplink Ports	2 x 10/100/1000Base-T or SFP
MAC Address Table Size	8000
Mounting	DIN rail, Wall