Cisco IE 3000 User Manual

Contents
xxii
Cisco IE 3000 Switch Software Configuration Guide
OL-13018-01
Configuring SNMP 29-6
Default SNMP Configuration 29-6
SNMP Configuration Guidelines 29-6
Disabling the SNMP Agent 29-7
Configuring Community Strings 29-8
Configuring SNMP Groups and Users 29-9
Configuring SNMP Notifications 29-11
Setting the Agent Contact and Location Information 29-15
Limiting TFTP Servers Used Through SNMP 29-15
SNMP Examples 29-16
Displaying SNMP Status 29-17
CHAPTER 30 Configuring Network Security with ACLs 30-1
Understanding ACLs 30-1
Port ACLs 30-2
Handling Fragmented and Unfragmented Traffic 30-3
Configuring IPv4 ACLs 30-4
Creating Standard and Extended IPv4 ACLs 30-5
Access List Numbers 30-6
Creating a Numbered Standard ACL 30-7
Creating a Numbered Extended ACL 30-8
Resequencing ACEs in an ACL 30-12
Creating Named Standard and Extended ACLs 30-12
Using Time Ranges with ACLs 30-14
Including Comments in ACLs 30-15
Applying an IPv4 ACL to a Terminal Line 30-16
Applying an IPv4 ACL to an Interface 30-16
Hardware and Software Treatment of IP ACLs 30-17
IPv4 ACL Configuration Examples 30-17
Numbered ACLs 30-18
Extended ACLs 30-18
Named ACLs 30-18
Time Range Applied to an IP ACL 30-19
Commented IP ACL Entries 30-19
Creating Named MAC Extended ACLs 30-19
Applying a MAC ACL to a Layer 2 Interface 30-21
Displaying IPv4 ACL Configuration 30-22

Cisco IE 3000 Specifications

General

Operating Temperature	-40 to 75°C (-40 to 167°F)
DRAM	128 MB
Flash Memory	32 MB
Uplink Ports	2 x 10/100/1000Base-T or SFP
MAC Address Table Size	8000
Mounting	DIN rail, Wall