Cisco IE 3000 - Page 740

Index
IN-18
Cisco IE 3000 Switch Software Configuration Guide
OL-13018-01
monitoring (continued)
network traffic for analysis with probe 26-2
port
blocking 22-18
protection 22-18
SFP status 11-19, 34-8
speed and duplex mode 11-14
traffic flowing among switches 27-1
traffic suppression 22-18
VLANs 13-13
VMPS 13-28
VTP 14-16
mrouter Port 19-3
mrouter port 19-5
MSTP
boundary ports
configuration guidelines 17-15
described 17-6
BPDU filtering
described 18-3
enabling 18-12
BPDU guard
described 18-2
enabling 18-11
CIST, described 17-3
CIST regional root 17-3
CIST root 17-5
configuration guidelines 17-14, 18-10
configuring
forward-delay time 17-23
hello time 17-22
link type for rapid convergence 17-24
maximum aging time 17-23
maximum hop count 17-24
MST region 17-15
neighbor type 17-25
path cost 17-20
port priority 17-19
root switch 17-17
MSTP (continued)
configuring (continued)
secondary root switch 17-18
switch priority 17-21
CST
defined 17-3
operations between regions 17-3
default configuration 17-14
default optional feature configuration 18-9
displaying status 17-26
enabling the mode 17-15
EtherChannel guard
described 18-7
enabling 18-14
extended system ID
effects on root switch 17-17
effects on secondary root switch 17-18
unexpected behavior 17-17
IEEE 802.1s
implementation 17-6
port role naming change 17-6
terminology 17-5
instances supported 16-9
interface state, blocking to forwarding 18-2
interoperability and compatibility among
modes
16-10
interoperability with IEEE 802.1D
described 17-8
restarting migration process 17-25
IST
defined 17-2
master 17-3
operations within a region 17-3
loop guard
described 18-9
enabling 18-15
mapping VLANs to MST instance 17-16