Cisco IE 3000 - Page 757

Index
IN-35
Cisco IE 3000 Switch Software Configuration Guide
OL-13018-01
UDLD (continued)
overview 25-1
resetting an interface 25-6
status, displaying 25-6
support for 1-6
unauthorized ports with IEEE 802.1x 10-7
unicast MAC address filtering 1-5
and adding static addresses 7-25
and broadcast MAC addresses 7-24
and CPU packets 7-24
and multicast addresses 7-24
and router MAC addresses 7-24
configuration guidelines 7-24
described 7-24
unicast storm 22-1
unicast storm control command 22-4
unicast traffic, blocking 22-8
UniDirectional Link Detection protocol
See UDLD
UNIX syslog servers
daemon configuration 28-12
facilities supported 28-13
message logging configuration 28-12
unrecognized Type-Length-Value (TLV) support 14-4
upgrading software images
See downloading
UplinkFast
described 18-3
disabling 18-13
enabling 18-13
support for 1-6
uploading
configuration files
preparing B-10, B-13, B-16
reasons for B-8
using FTP B-14
using RCP B-18
using TFTP B-12
uploading (continued)
image files
preparing B-25, B-28, B-32
reasons for B-23
using FTP B-31
using RCP B-35
using TFTP B-27
user EXEC mode 2-2
username-based authentication 9-6
V
version-dependent transparent mode 14-4
virtual IP address
cluster standby group 6-10
command switch 6-10
vlan.dat file 13-4
VLAN 1, disabling on a trunk port 13-18
VLAN 1 minimization 13-18
vlan-assignment response, VMPS 13-24
VLAN configuration
at bootup 13-7
saving 13-7
VLAN configuration mode 2-2, 13-6
VLAN database
and startup configuration file 13-7
and VTP 14-1
VLAN configuration saved in 13-6
VLANs saved in 13-4
vlan database command 13-6
VLAN filtering and SPAN 26-6
vlan global configuration command 13-6
VLAN ID, discovering 7-26
VLAN load balancing on flex links 19-2
configuration guidelines 19-8
VLAN management domain 14-2
VLAN Management Policy Server
See VMPS