Cisco IE 3000 - Page 8

Contents
viii
Cisco IE 3000 Switch Software Configuration Guide
OL-13018-01
Adding and Removing Static Address Entries 7-23
Configuring Unicast MAC Address Filtering 7-24
Displaying Address Table Entries 7-26
Managing the ARP Table 7-26
CHAPTER 8 Configuring SDM Templates 8-1
Understanding the SDM Templates 8-1
Configuring the Switch SDM Template 8-2
Default SDM Template 8-2
SDM Template Configuration Guidelines 8-2
Setting the SDM Template 8-2
.Displaying the SDM Templates 8-3
CHAPTER 9 Configuring Switch-Based Authentication 9-1
Preventing Unauthorized Access to Your Switch 9-1
Protecting Access to Privileged EXEC Commands 9-2
Default Password and Privilege Level Configuration 9-2
Setting or Changing a Static Enable Password 9-3
Protecting Enable and Enable Secret Passwords with Encryption 9-3
Disabling Password Recovery 9-5
Setting a Telnet Password for a Terminal Line 9-6
Configuring Username and Password Pairs 9-6
Configuring Multiple Privilege Levels 9-7
Setting the Privilege Level for a Command 9-8
Changing the Default Privilege Level for Lines 9-9
Logging into and Exiting a Privilege Level 9-9
Controlling Switch Access with TACACS+ 9-10
Understanding TACACS+ 9-10
TACACS+ Operation 9-12
Configuring TACACS+ 9-12
Default TACACS+ Configuration 9-13
Identifying the TACACS+ Server Host and Setting the Authentication Key 9-13
Configuring TACACS+ Login Authentication 9-14
Configuring TACACS+ Authorization for Privileged EXEC Access and Network Services 9-16
Starting TACACS+ Accounting 9-17
Displaying the TACACS+ Configuration 9-17
Controlling Switch Access with RADIUS 9-17
Understanding RADIUS 9-18
RADIUS Operation 9-19