Cisco Nexus 5000 Series - Configuring Changes in vPC Topologies

Send feedback to nx5000-docfeedback@cisco.com
Index
IN-13
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
OL-16597-01
example configurations 17-15
manually monitoring 17-13
monitoring 17-2
verifying configuration 17-14
Rapid Spanning Tree Protocol
See RSTP
RBAC
default settings
22-10
RCFs
description
33-3
incoming 33-5
rejecting incoming 33-6
read-only zones
default settings
38-24
reason codes
description
32-5
reconfigure fabric frames. See RCFs
reduced MAC address
8-3
redundancy
VSANs
37-4
redundant physical links
example (figure)
40-2
Registered State Change Notifications. See RSCNs
reserved-range VLANs
See VLANs
retransmitting intervals
configuring for FSPF
40-8
description 40-7
roles
authentication
22-1
rollback
checkpoint copy
23-1
creating a checkpoint copy 23-1
default settings 23-4
deleting a checkpoint file 23-1
description 23-1
example configuration 23-1
guidelines 23-1
high availability 23-1
implementing a rollback 23-1
limitations 23-1
reverting to checkpoint file 23-1
verifying configuration 23-4
root guard
See STP root guard
root switch
MSTP
9-16
route costs
computing
40-6
RSCNs
clearing statistics
41-6
default settings 41-10
description 41-4
displaying information 41-5
multiple port IDs 41-5
suppressing domain format SW-RSCNs 41-6
RSCN timers
configuration distribution using CFS
41-7
configuring 41-6
displaying configuration 41-7
RSTP
active topology
8-10
BPDU
processing
8-14
designated port, defined 8-10
designated switch, defined 8-10
proposal-agreement handshake process 8-7
rapid convergence 8-7
point-to-point links 8-7
root ports 8-7
root port, defined 8-10
See also MSTP
runtime checks
static routes
40-9
runtime diagnostics
information
24-2