Send feedback to nx5000-docfeedback@cisco.com
1-10
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
OL-16597-01
Chapter 1 Configuring User Accounts and RBAC
Default Settings
The following example shows how to configure a user role feature group:
role feature-group name Security-features
feature radius
feature tacacs
feature aaa
feature acl
feature access-list
Default Settings
Table 1-1 lists the default settings for user accounts and RBAC parameters.
Table 1-1 Default User Accounts and RBAC Parameters
Parameters Default
User account password Undefined.
User account expiry date. None.
Interface policy All interfaces are accessible.
VLAN policy All VLANs are accessible.
VFC policy All VFCs are accessible.
VETH policy All VETHs are accessible.
To Next Page
Loading...
