Cisco Nexus 5000 Series - Page 263

Send feedback to nx5000-docfeedback@cisco.com
1-15
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
OL-16597-01
Chapter 1 Configuring TACACS+
Default Settings
Default Settings
Table 1-1 lists the default settings for TACACS+ parameters.
Table 1-1 Default TACACS+ Parameters
Parameters Default
TACACS+ Disabled
Dead timer interval 0 minutes
Timeout interval 5 seconds
Idle timer interval 0 minutes
Periodic server monitoring username test
Periodic server monitoring password test