Cisco Nexus 5000 Series - Page 340

Send feedback to nx5000-docfeedback@cisco.com
1-10
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
OL-16597-01
Chapter 1 Configuring System Message Logging
Default Settings
Default Settings
Table 1-3 lists the default settings for system message logging parameters.
Table 1-3 Default System Message Logging Parameters
Parameters Default
Console logging Enabled at severity level 2
Monitor logging Enabled at severity level 2
Log file logging Enabled to log:messages at severity level 5
Module logging Enabled at severity level 5
Facility logging Enabled;
Time-stamp units Seconds
syslog server logging Disabled
syslog server configuration distribution Disabled