Cisco Nexus 5000 Series - Page 490

Send feedback to nx5000-docfeedback@cisco.com
1-2
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
OL-16597-01
Chapter 1 Configuring and Managing VSANs
Information About VSANs
• Fabric-related configurations in one VSAN do not affect the associated traffic in another VSAN.
• Events causing traffic disruptions in one VSAN are contained within that VSAN and are not
propagated to other VSANs.
Figure 1-1 shows a fabric with three switches, one on each floor. The geographic location of the switches
and the attached devices is independent of their segmentation into logical VSANs. No communication
between VSANs is possible. Within each VSAN, all members can talk to one another.
Figure 1-1 Logical VSAN Segmentation
Figure 1-2 shows a physical Fibre Channel switching infrastructure with two defined VSANs: VSAN 2
(dashed) and VSAN 7 (solid). VSAN 2 includes hosts H1 and H2, application servers AS2 and AS3, and
storage arrays SA1 and SA4. VSAN 7 connects H3, AS1, SA2, and SA3.
The application servers or storage arrays can be connected to the switch using Fibre Channel or virtual
Fibre Channel interfaces. A VSAN can include a mixture of Fibre Channel and virtual Fibre Channel
interfaces.
Switch 1
Switch 2
Switch 3
Engineering
VSAN
Marketing
VSAN
Accounting
VSAN
Floor 3
Floor 2
Floor 1
79532