Cisco Nexus 7000 Series - Additional References; Related Documents; Standards; Default Settings

Send document comments to nexus7k-docfeedback@cisco.com.
5-13
Cisco Nexus 7000 Series NX-OS Unicast Routing Configuration Guide, Release 4.x
OL-20002-02
Chapter 5 Configuring WCCPv2
Default Settings
Default Settings
Table 5-1 lists the default settings for WCCPv2 parameters.
Additional References
For additional information related to implementing WCCPv2, see the following sections:
• Related Documents, page 5-13
• Standards, page 5-13
Related Documents
Standards
Feature History for WCCPv2
Table 5-2 lists the release history for this feature.
Table 5-1 Default WCCPv2 Parameters
Parameters Default
Authentication no authentication
WCCPv2 disable
Related Topic Document Title
WCCPv2 CLI commands Cisco Nexus 7000 Series NX-OS Unicast Routing Command
Reference
Standards Title
No new or modified standards are supported by this
feature, and support for existing standards has not been
modified by this feature.
—
Table 5-2 Feature History for WCCPv2
Feature Name Releases Feature Information
WCCPv2 4.2(1) This feature was introduced.