Cisco Nexus 7000 Series - Default Settings; Additional References; Related Documents; Feature History for Static Routing

Send document comments to nexus7k-docfeedback@cisco.com.
13-7
Cisco Nexus 7000 Series NX-OS Unicast Routing Configuration Guide, Release 4.x
OL-20002-02
Chapter 13 Configuring Static Routing
Default Settings
Default Settings
Table 13-1 lists the default settings for static routing parameters.
Additional References
For additional information related to implementing static routing, see the following sections:
• Related Documents, page 13-7
Related Documents
Feature History for Static Routing
Table 13-2 lists the release history for this feature.
Table 13-1 Default Static Routing Parameters
Parameters Default
administrative distance 1
RIP feature disabled
Related Topic Document Title
Static Routing CLI Cisco Nexus 7000 Series NX-OS Unicast Routing Command
Reference
VDCs Cisco Nexus 7000 Series NX-OS Virtual Device Context
Configuration Guide, Release 4.x
Table 13-2 Feature History for Static Routing
Feature Name Releases Feature Information
Static Routing 4.0(1) This feature was introduced.