Cisco Nexus 7000 Series - Configuring RIP; Information about RIP

To Next Page

To Previous Page

CHAPTER

Send document comments to nexus7k-docfeedback@cisco.com.

12-1

Cisco Nexus 7000 Series NX-OS Unicast Routing Configuration Guide, Release 4.x

OL-20002-02

Configuring RIP

This chapter describes how to configure the Routing Information Protocol (RIP).

This chapter includes the following sections:

• Information About RIP, page 12-1

• Licensing Requirements for RIP, page 12-4

• Prerequisites for RIP, page 12-4

• Configuration Guidelines and Limitations, page 12-4

• Configuring RIP, page 12-5

• Verifying RIP Configuration, page 12-17

• Displaying RIP Statistics, page 12-17

• RIP Example Configuration, page 12-18

• Related Topics, page 12-18

• Default Settings, page 12-18

• Additional References, page 12-18

• Feature History for RIP, page 12-19

Information About RIP

This section includes the following topics:

• RIP Overview, page 12-2

• RIPv2 Authentication, page 12-2

• Split Horizon, page 12-2

• Route Filtering, page 12-3

• Route Summarization, page 12-3

• Route Redistribution, page 12-3

• Load Balancing, page 12-4

• High Availability, page 12-4

• Virtualization Support, page 12-4

Other manuals for Cisco Nexus 7000 Series