Send document comments to nexus7k-docfeedback@cisco.com.
8-31
Cisco Nexus 7000 Series NX-OS Unicast Routing Configuration Guide, Release 4.x
OL-20002-02
Chapter 8 Configuring EIGRP
Related Topics
Related Topics
See Chapter 16, “Configuring Route Policy Manager” for more information on route maps.
Default Settings
Table 8-1 lists the default settings for EIGRP parameters.
Additional References
For additional information related to implementing EIGRP, see the following sections:
• Related Documents, page 8-32
Table 8-1 Default EIGRP Parameters
Parameters Default
Administrative distance
• Internal routes—90
• External routes—170
Bandwidth percent 50 percent
Default metric for redistributed routes
• bandwidth—100000 Kb/s
• delay—100 (10 microsecond units)
• reliability—255
• loading—1
• MTU—1500
EIGRP feature Disabled
Hello interval 5 seconds
Hold time 15 seconds
Equal-cost paths 8
Metric weights 1 0 1 0 0
Next-hop address advertised IP address of local interface
NSF convergence time 120
NSF route-hold time 240
NSF signal time 20
Redistribution Disabled
Split horizon Enabled
To Next Page
Loading...
