Send document comments to nexus7k-docfeedback@cisco.com.
9-31
Cisco Nexus 7000 Series NX-OS Unicast Routing Configuration Guide, Release 4.x
OL-20002-02
Chapter 9 Configuring IS-IS
Feature History for IS-IS
Related Documents
Standards
Feature History for IS-IS
Table 9-2 lists the release history for this feature.
Related Topic Document Title
IS-IS CLI commands Cisco Nexus 7000 Series NX-OS Unicast Routing Command
Reference
VDCs and VRFs Cisco Nexus 7000 Series NX-OS Virtual Device Context
Configuration Guide, Release 4.x
Standards Title
No new or modified standards are supported by this
feature, and support for existing standards has not been
modified by this feature.
—
Table 9-2 Feature History for IS-IS
Feature Name Releases Feature Information
Graceful shutdown 4.2(1) Added support to gracefully shut down an IS-IS instance or
IS-IS on an interface but preserve the IS-IS configuration.
Limits on redistributed routes 4.2(1) Added support for limiting the number of redistributed
routes.
Transient mode for hello padding 4.1(2) Added support to set or unset the hello padding mode.
Attached bit 4.1(2) Added support to set or unset the attached bit.
IS-IS 4.0(1) This feature was introduced.
To Next Page
Loading...
