Send document comments to nexus7k-docfeedback@cisco.com.
14-14
Cisco Nexus 7000 Series NX-OS Unicast Routing Configuration Guide, Release 4.x
OL-20002-02
Chapter 14 Configuring Layer 3 Virtualization
Related Topics
interface ethernet 1/2
vrf member Red
ip address 192.0.2.1/16
ip router ospf Lab area 0
no shutdown
!Configure another interface to use ospf Production on VRF Blue
interface ethernet 10/2
vrf member Blue
ip address 192.0.2.1/16
ip router ospf Production area 0
no shutdown
!
interface ethernet 10/3
vrf member Green
ip address 192.0.2.1/16
ip router ospf Production area 0
no shutdown
!configure the SNMP server
snmp-server user admin network-admin auth md5 nbv-12345
snmp-server community public ro
!Create the SNMP contexts for each VRF
snmp-server context lab instance Lab vrf Red
snmp-server context production instance Production vrf Blue
!Use the SNMP context lab to access the OSPF-MIB values for the OSPF instance Lab in VRF
Red in this example.
Use the SNMP context lab to access the OSPF-MIB values for the OSPF instance Lab in VRF Red in
this example.
Related Topics
The following topics can give more information on VRFs:
• Cisco Nexus 7000 Series NX-OS Fundamentals Configuration Guide, Release 4.x
• Cisco Nexus 7000 Series NX-OS System Management Configuration Guide, Release 4.x
Default Settings
Table 14-1 lists the default settings for VRF parameters.
Table 14-1 Default VRF Parameters
Parameters Default
Configured VRFs default, management
routing context default VRF
To Next Page
Loading...
