Cisco Nexus 7000 Series - Document Conventions

Send document comments to nexus7k-docfeedback@cisco.com.
iv
Cisco Nexus 7000 Series NX-OS Unicast Routing Configuration Guide, Release 4.x
OL-20002-02
Preface
Document Conventions
Command descriptions use these conventions:
Chapter 12, “Configuring RIP” Describes how to configure the RIP routing protocol for
IPv4 networks.
Chapter 13, “Configuring Static Routing” Describes how to configure static routing for IPv4 and
IPv6 networks.
Chapter 14, “Configuring Layer 3
Virtualization”
Describes how to configure layer 3 virtualization.
Chapter 15, “Managing the Unicast RIB
and FIB”
Describes how to view and modify the unicast RIB and
FIB.
Chapter 16, “Configuring Route Policy
Manager”
Describes how to configure the Route Policy Manager,
including IP prefix lists and route-maps for filtering and
redistribution.
Chapter 17, “Configuring Policy-Based
Routing”
Describes how to configure route maps for policy based
routing.
Chapter 18, “Configuring GLBP” Describes how to configure GLBP.
Chapter 19, “Configuring HSRP” Describes how to configure the Hot Standby Routing
Protocol.
Chapter 20, “Configuring VRRP” Describes how to configure the Virtual Router
Redundancy Protocol.
Chapter 21, “Configuring Object
Tracking”
Describes how to configure object tracking.
Appendix A, “IETF RFCs supported by
Cisco NX-OS Unicast Features, Release
4.x”
Lists IETF RFCs supported by Cisco NX-OS.
Appendix 2, “Configuration Limits for
Cisco NX-OS Layer 3 Unicast Features,
Release 4.x”
Lists configuration limits for Cisco Nexus 7000 series.
Title Description
Convention Description
boldface font Commands and keywords are in boldface.
italic font Arguments for which you supply values are in italics.
[ ] Elements in square brackets are optional.
[ x | y | z ] Optional alternative keywords are grouped in brackets and separated by vertical
bars.
string A nonquoted set of characters. Do not use quotation marks around the string or
the string will include the quotation marks.