Cisco Nexus 7000 Series - Displaying BGP Statistics; Basic BGP Example Configuration; Related Topics

Send document comments to nexus7k-docfeedback@cisco.com.
10-23
Cisco Nexus 7000 Series NX-OS Unicast Routing Configuration Guide, Release 4.x
OL-20002-02
Chapter 10 Configuring Basic BGP
Displaying BGP Statistics
Displaying BGP Statistics
To display BGP statistics, use the following commands:
Basic BGP Example Configuration
The following example shows a basic BGP configuration:
feature bgp
router bgp 64496
neighbor 2001:ODB8:0:1::55 remote-as 64496
address-family ipv6 unicast
next-hop-self
Related Topics
The following topics relate to BGP:
• Chapter 16, “Configuring Route Policy Manager.”
show {ip | ipv6} bgp options Displays the BGP status and configuration
information. This command has multiple options.
See the Cisco Nexus 7000 Series NX-OS Unicast
Routing Command Referencefor more
information.
show {ip | ipv6} mbgp options Displays the BGP status and configuration
information. This command has multiple options.
See the Cisco Nexus 7000 Series NX-OS Unicast
Routing Command Referencefor more
information.
show running-configuration bgp Displays the current running BGP configuration.
Command Purpose
Command Purpose
show bgp {ip | ipv6} {unicast | multicast}
[ip-address | ipv6-prefix] flap-statistics
[vrf vrf-name]
Displays the BGP route flap statistics. Use the clear bgp
flap-statistics command to clear these statistics.
show bgp sessions [vrf vrf-name] Displays the BGP sessions for all peers. Use the clear
bgp sessions command to clear these statistics.
show bgp sessions [vrf vrf-name] Displays the BGP sessions for all peers. Use the clear
bgp sessions command to clear these statistics.
show bgp statistics Displays the BGP statistics.