Cisco Nexus 7000 Series - Page 292

Send document comments to nexus7k-docfeedback@cisco.com.
10-22
Cisco Nexus 7000 Series NX-OS Unicast Routing Configuration Guide, Release 4.x
OL-20002-02
Chapter 10 Configuring Basic BGP
Verifying Basic BGP Configuration
show bgp {ip | ipv6} {unicast | multicast}
[ip-address | ipv6-prefix] {dampening
dampened-paths [regexp expression]} [vrf
vrf-name]
Displays the information for BGP route
dampening. Use the clear bgp dampening
command to clear the route flap dampening
information.
show bgp {ip | ipv6} {unicast | multicast}
[ip-address | ipv6-prefix] history-paths [regexp
expression] [vrf vrf-name]
Displays the BGP route history paths.
show bgp {ip | ipv6} {unicast | multicast}
[ip-address | ipv6-prefix] filter-list list-name [vrf
vrf-name]
Displays the information for the BGP filter list.
show bgp {ip | ipv6} {unicast | multicast}
[ip-address | ipv6-prefix] neighbors
[ip-address |
ipv6-prefix] [vrf vrf-name]
Displays the information for BGP peers. Use the
clear bgp neighbors command to clear these
neighbors.
show bgp {ip | ipv6} {unicast | multicast}
[ip-address | ipv6-prefix] {nexthop |
nexthop-database} [vrf vrf-name]
Displays the information for the BGP route next
hop.
show bgp paths Displays the BGP path information.
show bgp {ip | ipv6} {unicast | multicast}
[ip-address | ipv6-prefix] policy name [vrf
vrf-name]
Displays the BGP policy information. Use the
clear bgp policy command to clear the policy
information.
show bgp {ip | ipv6} {unicast | multicast}
[ip-address | ipv6-prefix] prefix-list list-name
[vrf
vrf-name]
Displays the BGP routes that match the prefix list.
show bgp {ip | ipv6} {unicast | multicast}
[ip-address | ipv6-prefix] received-paths [vrf
vrf-name]
Displays the BGP paths stored for soft
reconfiguration.
show bgp {ip | ipv6} {unicast | multicast}
[ip-address | ipv6-prefix] regexp expression [vrf
vrf-name]
Displays the BGP routes that match the AS_path
regular expression.
show bgp {ip | ipv6} {unicast | multicast}
[ip-address | ipv6-prefix] route-map map-name
[vrf vrf-name]
Displays the BGP routes that match the route
map.
show bgp peer-policy name [vrf vrf-name] Displays the information about BGP peer
policies.
show bgp peer-session name [vrf vrf-name] Displays the information about BGP peer
sessions.
show bgp peer-template name [vrf vrf-name] Displays the information about BGP peer
templates. Use the clear bgp peer-template
command to clear all neighbors in a peer template.
show bgp process Displays the BGP process information.
Command Purpose