Cisco Nexus 7000 Series - Verifying RIP Configuration; Displaying RIP Statistics

Send document comments to nexus7k-docfeedback@cisco.com.
12-17
Cisco Nexus 7000 Series NX-OS Unicast Routing Configuration Guide, Release 4.x
OL-20002-02
Chapter 12 Configuring RIP
Verifying RIP Configuration
Verifying RIP Configuration
To verify RIP configuration, use the following commands:
Displaying RIP Statistics
To display RIP statistics, use the following commands:
Use the clear ip rip policy command to clear policy statistics.
Use the clear ip rip statistics command to clear RIP statistics.
Command Purpose
show ip rip instance [instance-tag] [vrf
vrf-name]
Displays the status for an instance of RIP.
show ip rip [instance instance-tag] interface
slot/port detail [vrf vrf-name]
Displays the RIP status for an interface.
show ip rip [instance instance-tag] neighbor
[interface-type number] [vrf vrf-name]
Displays the RIP neighbor table.
show ip} rip [instance instance-tag] route
[ip-prefix/lengh [longer-prefixes |
shorter--prefixes]] [summary] [vrf vrf-name]
Displays the RIP route table.
show running-configuration rip Displays the current running RIP configuration.
Command Purpose
show ip rip [instance instance-tag] policy
statistics redistribute {bgp as | direct |
{eigrp | isis | ospf | ospfv3 | rip}
instance-tag | static} [vrf vrf-name]
Displays the RIP policy status.
show ip rip [instance instance-tag]
statistics interface-type number] [vrf
vrf-name]
Displays the RIP statistics.